LOW-PERM URETHANE

FOAMFLEX #1718

PROPERTY

SPECIFICATION

TEST METHOD

Composition

Polyether PolyUrethane

 

Cell Structure

Open

 

Density (pcf)

1.75 to 2.15

ASTM D3574-91

Compression Deflection (psi)

 

ASTM D3574-91

25%

0.15

 

50%

0.20

 

Compression Set 50%
(% loss)

15

ASTM D3574-91

Tensile Strength (psi)

9 min

ASTM D3574-91

Elongation (%)

125

ASTM D3574-91

Tear Resistance (ppi)

1

ASTM D3574-91

Flame Resistance

Pass

FMVSS 302,
CAL 117A

Pressure Pot (psi)

1.45

ASTM D3574-91

This product is certified to meet the following automotive specifications:
FORD .... ESA-M4D-200B
CHRYSLER .... MSAY-326A
GM .... GM251M Type 1
Jacobs and Thompson cannot anticipate all conditions under which this information and our products of other manufacturers in combination with our products, may be used. We accept no responsibility for results obtained by the application of the information or the safety and suitability of our products, either alone or in combination with other products. Unless otherwise agreed in writing, we sell the products without warranty and users are advised to make their own tests to determine the safety and suitability of each such product combination for their own purpose.

Questions, Comments or Suggestions?

webmaster@foamparts.ca

Vinyl Nitrile

1210, 1212

Neoprene Blends
(CR/EPT/SBR)
Closed Cell

1220, 1240, 1260

Expanded PVC

1307, 1388, 1357,
1391, 1376

Expanded EPDM
Closed Cell

1402, 1440

Micro Cellular
PolyUrethane

6153, 6204, 6256

Polyester Urethane
Open Cell

1820, 1840, 1860

Low Perm Urethane

1830, 1718

PolyEthylene

2542E, 2544A

EVA

2720

Felt/Flocked Felt

1990, 7425

Speciality Products

5215, 1224

Polyether Urethane
Open Cell

1727, 1735